Kitchen Drawer Handle Placement

Kitchen Drawer Handle Placement. The most popular one is placing it on drawer’s front right in center. The most popular placement is to centre the hardware in the middle of each drawer front.

Hardware Placement Guide
Hardware Placement Guide from truepositiontools.com

Of course, if you have really tall cabinet doors, you’ll want to give preference to longer pulls that will accentuate the door’s size. Cabinet knobs are placed opposite of door hinges. When you add the handles, make sure the hardware sits on the side opposite the hinge.

Aesthetically Pleasing And Symmetrical, The Main Drawback To This Placement Is That The Bottom Drawer Can Be Difficult To Reach Since The Hardware Is Low.


However, placement is of the essence as if a cabinet handle or doorknob goes into the wrong cabinetry, it can really mess up the overall. Center the hardware horizontally on the stile between 2 and 4 inches down from the top edge. I chose to use one pull on all drawers regardless of the width of the drawer.

For Standard Drawers, The Correct Cabinet Knob Placement Is Typically With Knobs Centered Vertically, So They Will Be In The Center Of The Panel.


Measure from the top corner rather than from the bottom corner. Cabinet knobs are placed opposite of door hinges. This creates a more contemporary look.

Another Way To Place Handle Is By Centering It On Top Drawer.


The thing to keep in mind with cabinet pulls has to do with placing them vertically or horizontally. The pull handle should be horizontal. Shell and curl handles will need to be placed on the horizontal edge due to their shape.

This Way You Don't Have To Bend Down So Far.


By admin filed under kitchen cabinets; Move down at least 2½ inches and install the drawer pull or hardware on that spot. When positioning both knobs horizontally, you should place each one about 1/6th of the drawer’s length in from each end.

Traditionally, Handles Are Positioned Horizontally On Drawers And Vertically On Doors.


How to install kitchen drawer handles. This is a very common question with shaker cabinets. Here is an example of good hardware placement.

Copyright © 2021

Kitchen Design Basics