How To Install A Single Handle Kitchen Faucet With Sprayer
How To Install A Single Handle Kitchen Faucet With Sprayer. Moen kitchen faucet with side sprayer kitchen faucet hose replacement moen install a single handle kitchen faucet install a single handle kitchen faucet. Installing a pullout kitchen faucet moen guided installations.
Connect supply lines to shut off valves. Moen produces a variety of sidemount handle faucets: First shut off the water supply to the faucet.
The Handle Will Lift Off When This Screw Is Loose Enough.
Feed the other end of the spray hose into the faucet spout until the end comes out under the sink. The faucet will have a pullout spray wand from the spout. Insert the side spray hose through the sprayer housing and attach to the spray hose outlet on the faucet.
Finish Valve Install (9:45) 7.
Connect outlet tube (9:08) 6. How to install a single handle kitchen faucet tos diy. The first step to repairing a faucet is to identify your handle style:
Before We Start, First Check That Your Kitchen Sink Features An Extra Hole Close To The Faucet For Installing A Sprayer.
As this is a single hole touch kitchen faucet, that means both hot and cold water pipes will connect to one single pipe with a dual joint connector. Now, using the water valve under the sink stop the water supply and drain out water from the sink and faucet if required. Connecting supply lines (6:13) 4.
Instead, For This Kitchen Faucet Repair, Cushion.
Connect supply lines to faucet. With your supply tubes facing down and your handle located on either the right or left side, insert the faucet through the center of the sink hole. Or if you don’t have a separate pipe for hot water then it will only have one connection and one pipe.
How To Install A Delta ® Kitchen Faucet With Touch 2.
Thread the mounting nut onto the faucet shank. Before you connect the spray hose to the faucet, make sure that it is in a position that will allow you to pull it out easily. The handle will lift off when this screw is loose enough.