Kitchen Sink Cutout Dimensions

Kitchen Sink Cutout Dimensions. Select the correct diagram for your sink and refer to the instructions below. Measure the sink width by placing your tape measure at the back edge of the sink (closest to the kitchen faucet) and stretching it across the sink basin to the front edge.

28inch Undermount Kitchen Sink 50/50 Double Bowl 16 Gauge
28inch Undermount Kitchen Sink 50/50 Double Bowl 16 Gauge from www.ruvati.com

18, 21, 24, 27, 30, 33, 36 etc.). Cutout opening is determined from the actual sink size. Only to find that the cutout in the granite countertop was too small!

Kitchen Sink Is Certified And Listed By Cupc With Limited Lifetime Warranty.


Only to find that the cutout in the granite countertop was too small! Provide proper clearance under the countertop for the faucet supply lines and the structural parts of the cabinet. Rectangular bar sinks have a length of 9 to 18 inches on each side and a depth of 6 to 10 inches.

Flush Mount Installation * Under Countertop Installation * Above Countertop Installation Cutout 10 Dia.


Locate and mark center lines of sink on countertop. Mounting hardware and installation brackets, and cutout template are included. Deep / right bowl size:

These Sinks Are Perfect For Families Who Have Multiple Cooks Or For Those Who Often Host Parties.


Measure the sink width by placing your tape measure at the back edge of the sink (closest to the kitchen faucet) and stretching it across the sink basin to the front edge. Kitchen sinks come in a myriad of sizes. 1000004398 template is available for download at elkay.com sinks are listed by iapmo cutout dimensions for top mount installation:

The Inner Bowl Of The Ikea Havsen Front Apron Double Bowl Kitchen Sink Is 16.125” (41 Cm) Wide, 15.75” (40 Cm) From Front To Back, And 7.875” (20 Cm) Deep.


Sink dimensions can vary from 9inches in length up to 40 inches for oversized sinks. Existing cutout is 31.375 x 19.875 when the new one requires 32.375 x 20.375. If the cutout template is not included with the product, refer to one of the options below to obtain a template.

The Cutout Opening Should Equal The Maximum Dimensions Of The Sink To Ensure A Minimum Gap Between The Sink And The Countertop Opening.


Hardware store plumber came to remove the 33x22 porcelain sink and install the new stainless steel sink. A cutout template may be included with a kitchen or bathroom sink but are not included with whirlpool baths. Standard kitchen sinks are 22 to 33 inches wide, whereas bar sinks are usually 9 ½ to 18 inches wide.

Copyright © 2021

Kitchen Design Basics